Darting Fish Tutorial

At the end of last year, I had lots of darting fish constructed thanks to the Rainbow Scrappy Challenge. However, I also realized that I had quite a few more to make. I now have a plan and need to make many fuschia and purple darting fish. This seemed a good time to make a tutorial for this pattern as I went along. Each fish block finishes 6 by 9 inches and is built on a one inch grid (which means that the stripes use 1.5 inch strips, for example).

The fish uses three colors: one for the face and two for the stripes. To start, I cut a 3.5 by 4.5 rectangle for the face. Next, I use two 1.5 inch strips of different fabrics each about 22 inches long.  This will be more than you will need but allows you flexibility in choosing which fabric will be the fin and/or the tail.

For my quilt, I am using a single background fabric. For that, I cut 2.5 inch and 1.5 inch strips. From the 2.5 inch background strip I cut four 2.5 inch squares. From the 1.5 inch strips, I cut four 1.5 inch squares, four 1.5 by 2.5 inch rectangles and two 1.5 by 4.5 inch rectangles.

 As mentioned earlier, the face is a 3.5 by 4.5 inch rectangle. The four fish stripes are 1.5 by 5.5 inches, the two fins are 1.5 by 3.5 inches and the two tail pieces are 1.5 inch squares. Also, to frame the face, you will want one 1.5 inch square from each of the two fabrics used in the fish body.  The photo shows how these pieces will be laid out roughly with the face to the left and the tail to the right.

I should mention that this fish is bidirectional and can face either direction (assuming no directional print is chosen for the fish).

This fish is built from flip triangles, squares that are sewn on the diagonal and then ironed over to make a triangle. One note of caution, however, is that the direction of the diagonals change for each tail piece and each fin.

In the photo, the top two rectangles show the two tail pieces that are formed by laying the 1.5 inch square fuschia square on a 1.5 by 2.5 inch background rectangle.

The bottom two rectangles show the top and bottom fin. In this case, the fin is a 1.5 by 3.5 inch rectangle of fuschia with two 1.5 inch squares of the background fabric on either end.

The lines show the direction to sew the seams. Remember not to sew exactly diagonal to diagonal, but to move a thread's distance towards the corner to accommodate folding the fabric over.

Also, sew the four body strips (1.5 by 5.5 inches) so they alternate.

After the flip triangles are ironed over, the two layers underneath the flip triangle can be trimmed away (allowing for the seam, of course).

Now the photo shows the fish layout for the next steps and includes the background fabric.

First, decide which stripe will be on the top and which will be on the bottom. Depending on what you choose, sew the matching 1.5 inch squares to the back corners of the fish's face to make flip triangles.

Next, sew two 2.5 inch squares to the back of the fish body to make flip triangles.

And you can also sew the two tail pieces together.

And last, but not least, sew a 1.5 by 2.5 inch background rectangle to the back of each fin. Then sew a 1.5 by 4.5 inch background rectangle to the front of each fin. 

At this point, we are far enough along that the block should smell fishy.

For this step, sew two 2.5 inch squares to the face on the diagonal (as shown) to make flip triangles.

Also, sew the tail to back of the fish. Match the points together. In fact, given how the flip triangles are ironed, when the front side of the tail is laid on top of the body, the two pieces will snug right into each other.

To finish the fish, sew the fish face to the body.

Next, sew the top fin to the fish. Carefully match the triangle at the back of the fin to the triangle that shapes the back of the fish body.

Finally, sew the bottom fin to the fish. Again, carefully match the triangle at the back of the bottom fin to triangle that forms the fish nether regions.

And this is what it looks like when its finished.

Here are the six fish that I made today.

Meanwhile, Molly has taken to sleeping on the window treatment she pulled down--an effective strategy to prevent me from putting it back up.

Spin out

Today I launched into a scrap project that I think I will scrap. I started with the delightful little spinners in Jen Kingwell's book Quilt Lovely. I used 1.5 inch strips that makes these finished 4 inch blocks.

I haven't been able to find a layout I like. Happily, there is a fox yapping out in the yard which is distracting Molly from clearing off the design wall so I have been allowed some time to fiddle. By morning, I am sure the blocks will be in a nice pile on the floor and that will mark the end of this diversion.

Green fish

It's the last week of May so its the last week of green. To celebrate, these fish indulged in a bit too much algae. If you would like to see more over indulgence in green, visit the Rainbow Scrappy Challenge. 

And to celebrate the end of the school year, here's the school of fish so far. It does look like they need a broader curriculum given they are all swimming in the same direction. I think its time for me to start working on some right facing fish. 

Vintage Spin Side One and Home Decoration

Here is one side of the vintage spin quilt with all the blocks sewn together. I have about 65 blocks made and will use 30 on each side. I have chosen the two fabrics for the center circles (one fabric for each side). I divided the blocks according to how well they went with each of the fabric centers.

However, you may have noticed that I haven't sewn the circles in yet. I was going to use the 6 minute circle method but realized it would be easier to machine quilt this without the circles. I will be able to march across the circles without over quilting or going around each circle. This means I will hand applique the circles at the very end.

Block placement was chosen by the design committee. Art critiques in this household can get very heated and involve a lot of biting.

And I hope you realize that Molly has her own projects...for example, taking down window treatments and wadding them on the floor where they belong. Apparently.

Alternative Jane Blocks

Not only have I neglected the Dear Jane blocks, but I have been remiss in completing the Alternate Jane blocks. As you may know, these are the blocks that Jane Stickle made but did not include in her now famous quilt. This is Block T22 or Typewriter Eraser. At this point in time, the typewriter eraser is considered an archaic artifact, but for Jane, it demonstrates that she was well ahead of her time.

Along with others in her time, Jane was probably very fond of The Ballad of The Monkey and Pig At Sea. This is Alternate Block U19 or Monkey and Pig At Sea. Contemporary quilt makers construct variations of this block, but few are able to acquire these rare reproduction fabrics. For further scholarship in this area, please reference Gayle at mangofeet.

Here are nine of the alternate Jane blocks. And yes, controversy abounds about these blocks and potential historical inaccuracies, such as pandas not being brought to Europe (as a skin) until after Jane's lifetime. Also, some question whether Jane would make circus blocks given her well publicized clown phobia.

But let me assure you that all of these blocks were vetted by a knowledgeable researcher.

Plus, the researcher was able to refute any and all issues raised by tiresome skeptics.

Scattered

As I was cleaning and sorting in the sewing room, I ran across the wavy fabric and knew it had to be a vintage spin block. So yes, I made another vintage spin block although both sides of the quilt are accounted for.

I also selected the backing for the bounding bunny quilt and happily I have exactly the amount I need for the quilt that grew too large: six yards. I bought this fabric for a backing many years ago and now it gets to fulfill its destiny.

I also made a new Dear Jane block B1 or Bachelor's Buttons.

My first version of this block didn't have enough contrast and was too pale and boring.

Meanwhile, Molly and Buddy are preparing to compete in the olympics...synchronized sleeping. Earlier, Molly practiced knocking applique pins off the sewing table. I was using them at the time and wasn't paying attention as she approached and before I knew what was happening the box was flying. Judges' scores are based on how far the tiny applique pins fly and spread, and by how loud the person yells.  She scored all tens.

Bounding Bunny

The bounding bunny quilt top is finished. First I added the floating border and then the bunny tail border. It doesn't seem like a lot of progress for one day, but I had a lot of help. And in this case, help means burrowing under the quilt top and then attacking anything that moves.